Safety Instructions - Virax 295000 Notice D'utilisation

Safety instructions

Read and keep these instructions. Observe the following basic safety measures to reduce the risk of
electric discharge or fire when using electric tools.
General safety instructions
Choice of tool
−
Always use the correct tool for the job. Do not use accessories or attachments of insufficient
capacity to perform heavy duty tasks. Do not use tools for any other purpose than that for which they
have been designed.
Maintenance and storage
−
Store your tools in a safe place. When not in use, tools should be stored in a dry, closed place, out
of reach of children.
−
Carefully maintain your tools. Keep them clean for better and safer performance. Follow the
maintenance instructions as well as the recommendations regarding the changing of accessories.
Keep the handles dry and free of oil or grease.
−
Check the tool for damage. Before using the tool, always carefully check that its various parts are
operating properly. Check for incorrect operation of moving parts, seizing of moving parts and
breakage of parts. Check for proper mounting of all parts and any other conditions that may prevent
the perfect operation of the tool. Any guard, switch or other part that is damaged or defective should
be properly repaired or replaced by a qualified technician.
−
Warning! Use the tool and its accessories in accordance with these safety instructions. Also remain
within the limits of the tool, taking into account the working conditions and the task to be performed.
Using tools for other than the intended tasks can be dangerous.
−
This tool is in accordance with all the relevant safety rules. All repairs must be performed by
qualified persons using original manufacturer's spare parts. Failure to do so may be dangerous for the
user and cancel the warranty.
User safety instructions:
−
Keep children away from the tools. Do not allow other people to touch the tool. Keep them away
from your work area.
−
Wear appropriate clothing. Do not wear loose clothing or jewellery, as they can become caught in
moving parts.
−
Rubber gloves and non-slip footwear are recommended when working out of doors. Long hair
should be worn in a hair net.
−
Do not overreach. Avoid adopting a tiring position. Keep proper footing and balance at all times.
−
Be constantly alert. Pay attention to the task, use common sense and do not operate the tool when
tired.
Safety instructions regarding the working area
−
Keep the work area tidy. A cluttered work area increases the risk of injury.
−
Consider the work area environment. Do not expose electric tools to the rain. Do not use electric
tools in a damp or wet environment.
−
Keep the work area well lit. Do not use electric tools in the vicinity of flammable liquids or gasses.
DESCALING PUMP
6