Canvas FHWS80031 Instructions D'assemblage page 9

16 Product No. 085-1573-8 | Model No. FHWS80031
Step 1
B, C, AA, BB
Requires
Carefully place the fire pit frame (C) upside down on a soft, flat surface.
Line up the bolt holes on the fire pit frame (C) with the corresponding
bolt holes on the legs (B). Insert M6x15 bolt and washer (AA) and
tighten with the Hex Key (BB).
NOTE: Do not completely
tighten until all assembly is
completed.
B
B
C
Step 2
E
Requires
Turn the fire pit table over carefully and place the lava rocks (E) into the burner
bowl. Caution: To ensure proper function the screen on the pilot housing should
not be blocked by the lava rocks.
AA
B
B
Igniter Box
E
Burner
Tube
Do not block
opening
CORRECT INCORRECT
Step 3
A
Requires
Place the burner lid (A) over the burner bowl. Make sure to remove the burner lid
(A) before lighting. Do not place the lid back into the burner bowl until it has
cooled down.
A
Step 4
G, K, L
Requires
Insert the included battery (G) and switch knob (L) into the flame ignitor (K)
and twist the button cover on. Do not over-tighten.
WARNING: Battery may contain mercury. Do not put batteries into the fire or trash.
Please treat batteries as hazardous waste and recycle properly.
K
17
L
G