Verification Tone; Maintenance - Swissvoice DECT RTX 4002 Manuel D'utilisation

DECT Repeater

Verification tone

The verification tone enables you to establish whether or not the mobile unit is working
in the extended area of the repeater. This tone is audible on the activated mobile unit as
long as the unit is connected to the repeater.
Carry out the procedure described below on your repeater in order to switch the verifi-
cation tone on and off:
1. Switch off the unit (disconnect the power plug)
2. Switch on for 1–5 seconds and switch it off again.
3. Switch on again. The LED on the unit is flashing slowly, switch off again.
4. Switch it on again. The verification tone is then activated or deactivated.

Maintenance

Simply wipe the repeater with a damp cloth oran antistatic wipe. Never use solvents or a
dry cloth (static discharge).
25