Placement - Swissvoice DECT RTX 4002 Manuel D'utilisation

DECT Repeater

Placement

To get the best operation conditions for the repeater, it is important to place it correctly.
Here are a few tips for placing repeaters.
Choose a raised position with good base station reception.
To avoid mutual interference, do not position the repeater in the immediate vicinity of
electronic equipment such as hi-fi systems, office equipment or microwave ovens.
Avoid positioning the repeater near heat sources such as heating elements or near
obstacles such as metal doors, thick walls, niches and cupboards.
A distance of minimum 10 meter should be observed when installing two repeaters in
an over lapping reception range.
To find the best possible location for the repeater, you have to try different locations.
Establish a call and walk around with the handset to determine the base stations coverage
area. You can install the repeater at a location, in the edge of the coverage area, where
you still have a good connection between the handset and the base station. A new
coverage area will now be available around the repeater.
Note The LED must remain on constantly after the device has been switched on.
If the LED flashes, the repeater is too far away from the base station or
reception is being hindered by thick walls or metal objects (e. g. radiators)
24