Dect Repeater; System With Multiple Repeaters - Swissvoice DECT RTX 4002 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11

DECT Repeater

DECT Repeater
A repeater is used when you need to extend the range of your cordless DECT telephone
to include areas where reception was previously not available.
All the usual mobile unit functions are supported by the base station in this extended
radio range.
The repeater and base station have wireless connections with each other, just as the
repeater and handset have wireless connections. Signals are exchanged without the user
hearing or noticing the difference.

System with multiple repeaters

Up to 6 repeaters can be registered
at a base station. The number of mobile
units to be operated only depends on
the type of the base station installed.
However, the number of simultaneous
calls is limited to 2.
All repeaters must be installed within the
base stations coverage area, as shown in
the drawings. It is not possible to install
repeaters in series.
The repeaters can be used to extend the
coverage area in all directions – including
up and down (e. g. to cover several floors
in a building).
If the repeaters are placed correctly (overlap-
ping the coverage area of the base station), you can go from one area (cell) to the other
while speaking on the mobile unit. The mobile unit will automatically switch from cell to
cell (handover), without this being noticed during the telephone call.
21

Publicité

Table des Matières
loading

Table des Matières