Fault Display - La Sommeliere CTPE248 Notice

4.1.5 Heater failure alarm
When the sensor detects that the temperature is deviated 4ºC for 24 hours, "
ring, pressing " " or "
4.1.6 Abnormal temperature alarm
3. When the cabinet temperature is higher than 32ºC, LCD display will show "
hours, LCD and backlight will flash, buzzer will alarm. When pressing "
alarm and backlight will not flash. Only LCD flashes and shows "
4. When the cabinet temperature is lower than 0ºC, LCD display will show "
hours, LCD and backlight will flash, buzzer will alarm. When pressing "
alarm and backlight will not flash. Only LCD flashes and shows "

4.1.7 Fault display

Temperature sensor open circuit
Temperature sensor short circuit
4.1.8 Winter position: How does it work?
1. When the setting temperature is lower than the internal temperature of the cabinet, the machine will start
to work and refrigeration.The cold circuit operating indicator light will be on(green color).
When the setting temperature is higher than the internal temperature of the cabinet, the machine will
2.
stop working and stop the cooling, heating wire will begin to work to maintain cabinet temperature
equilibrium. Machine's work or stop without any environmental temperature. The hot circuit operating
", the buzzer stops, but "
Fault
22
" will flash and buzzer will
" keeps flashing until deviate less than 4ºC.
", if the status lasts for 3
" or "
", until temperature is normal.
", if the status lasts for 3
" or "
", until temperature is normal.
LCD display code
", buzzer will not
", buzzer will not