La Sommeliere CTPE248 Notice page 16

1. Grommet
6. Phillips screw 7. Washer
12. Grommet 13. Handle of door
3.2 Installing the drip tray
The drip tray is already installed. If it doesn't, install the drip tray on the compressor support at the back of the
cabinet, locating it under the small pipe protruding from the housing, the lower part of the tank being placed
under this pipe. See diagram below:
3.3 Installing the carbon filter
The carbon filter is already installed. If it doesn't, install
the carbon filter, which you will find inside your cabinets,
by placing it in the air circulation hole located on the top
inside the cabinet. The carbon filter can be used for one
year, please change it thereafter. Contact your local
distributor for new carbon filter. Please remove the used
carbon filter before inserting the new one.
2. Screw 3. Top hinge
8. Door pivot guide
14. Chamfer head screw
Installing the drip tray
4.Grommet
9. Washer
15
5. Closing clip
10. Hinge nut 11. Pivot