Pioneer SGY-PM910H2 Mode D'emploi page 8

EN
Product Configuration
Strain gauge unit cover x 1
for each type
For FC-6800
Chain ring Adapter
For FC-6800 Adapter base
For FC-9000
Magnet
Patch type x 2 Arm type (right side) Arm type (left side)
Others
• User's Manual (this document)
• Warranty Card
• Batteries (CR2032) x 2 (preinstalled in the sensors)
• Right transmitter cover (metallic gray)
• Hex screws (M2.6 x 8 mm) x 3 (for the right transmitter x 3)
• Hex screws (M2.6 x 5 mm) x 3 (spare for the right transmitter cover x 3)
• Cable ties x 10 (for the left magnet x 2, for the right magnet x 2, spare x 6)
• Cushions for the arm type magnet installation x 2
• Patch type magnet base × 2
• Tape for installing the chain ring adapter
• Tape for installing the FC-6800 adapter base
8