Publicité
Les langues disponibles
Les langues disponibles
User Manual
Installation - front and rear diagram and function list
1: Power Switch
3: HDMI Input Signal LED
5: DVI Input Signal LED
7: Input Selection Switch
9: RS-232 (RJ45) (firmware upgrade only)
11-14: HDMI Female Output Ports
Operation
Important! It is strongly recommended that you use 4 identical (Brand and Model) displays for optimum
performance.
3 Modes of operation are available, 2x2, 1x2 and 1x4. These can be selected by using the IR remote
control.
Below you will find the layout configuration of the physical screens depending on which option is
chosen.
2: HDMI Female Input
4: DVI Female Input
6: L/R 3.5mm Stereo Output
8: IR Receiver
10: HDMI Output Signal LEDs
15: PSU Input (12V DC)
English
Publicité
