Philips AVENT SCF330 Mode D'emploi page 11

Masquer les pouces Voir aussi pour AVENT SCF330:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting
This chapter summarizes the most common problems you could encounter with the breast pump.
If you are unable to solve the problem with the information below, contact the Consumer Care
Centre in your country or visit us online at www.philips.com/support.
Problem
I experience pain
when I use the breast
pump.
The breast pump is
scratched.
The breast pump is
discolored.
I do not feel any
suction.
4213_354_1567_2_DFU SPECIAL_140x200_v3.indd 11
Solution
Stop using the breast pump and consult your breastfeeding advisor.
If the pump does not come away easily from the breast, it may be
necessary to break the vacuum by placing a finger between the breast
and the massage cushion or between the breast and the pump funnel.
In case of regular use, some light scratching is normal and does not
cause problems. However, if a part of the breast pump becomes badly
scratched or if it cracks, stop using the breast pump and contact the
Philips Consumer Care Center or visit www.philips.com/shop to obtain
a replacement part. Be aware that combinations of cleaning agents,
sanitizing solution, softened water and temperature fluctuations may,
under certain circumstances, cause the plastic to crack. Avoid contact
with abrasive or antibacterial detergents as these can damage the plastic.
You can still use the breast pump. For replacement parts,
please contact the Philips Consumer Care Center in your country
or visit www.philips.com/shop for spare parts.
Follow the steps in chapter 'Preparing for use', to reassemble the breast
pump. Make sure the massage cushion is sealed around the rim of the
breast pump and make sure the white valve is firmly in place.
EngliSh
11
6/18/13 2:42 PM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Avent scf330/20Avent scf330/12Avent scf330/19Avent scf330/13

Table des Matières