Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Solving Problems
Check the following section for solutions to common problems. For additional information, see the on-
screen ELPIU01 User's Guide.
Interactive Pen Problems
•
Make sure the USB cable is securely connected to the interactive module and computer. Try
disconnecting and reconnecting the cable to your computer.
•
If you don't see the
following:
Windows: Select
or
.
Driver
Mac OS: Open the
Application
•
If you see a red
on the pen icon, the computer and interactive module are not connected correctly.
X
Try removing and reconnecting the USB cable.
•
Make sure the pen batteries have enough power. If the light on the pen doesn't turn green when you
press the button, you need to replace the batteries.
•
Make sure nothing is blocking the signal between the pen and the interactive module. Even if you are
casting a shadow on the projected image, you should still be able to use the interactive pen.
•
If the pen skips or is difficult to use, try moving to the side to avoid blocking the signal to the
interactive module.
•
Dim the room lights and turn off any fluorescent lights. Make sure the projection surface and the
interactive module are not in direct sunlight or other sources of bright lighting.
•
For easier operation, hold the pen tip at an upward angle to the projection surface.
•
If the pen position is not accurate, you may need to recalibrate (see the on-screen ELPIU01User's
Guide for details).
Battery Problems
•
If the lights on the battery charger do not turn on or flash when you plug it in, make sure you removed
the cardboard strip from the charger and inserted the batteries correctly. See the instruction sheet
included with the battery charger.
pen icon on your taskbar (Windows) or in the dock (Mac OS), do one of the
>
or
Start
All Programs
Programs
folder, then select the
17
>
EPSON Projector
icon.
Easy Interactive Driver
>
Easy Interactive
Publicité
Chapitres
Table des Matières
