Using The Interactive Module - Epson BrightLink Solo Guide D'installation Rapide

5
Slide the cover over the wall plate as shown.
Note
Make sure you route the USB cable around the whiteboard or image area. An optional cable management
system is available from Epson (part # ELPCK01).
6
To attach the bracket plate cover, follow the instructions that came with the cover.
7
For convenient pen storage and security, attach the pen tray to your whiteboard or wall (bolts not
included).

Using the Interactive Module

Once the interactive module is installed on the wall, you can connect the USB cable to your computer and
begin using the interactive pens. For detailed instructions and troubleshooting tips, see your on-screen
ELPIU01 User's Guide.
Follow these steps to get ready:
1 Install the Easy Interactive Driver software on your computer from the CD labeled
Software for Easy Interactive Function
You can also install TeamBoard Draw annotation software.
2 Install the pen batteries as shown. You can use either the alkaline batteries or the rechargeable batteries;
do not mix the two battery types.
3 Connect your computer to your projector and display an image.
.
15
Epson Projector