Onkyo HT-R693 Mode D'emploi Base page 3

Step 1: Connections
Personal computer
HDMI
OUT
Game console
1
Connecting the TV and players
Important: The power cord must be connected only after all
other connections are completed.
HDMI cable connection
The unit has many HDMI jacks on its rear panel and each
of them corresponds to an input selector button of the
same name on the front panel. For example, a Blu-ray
Disc player will be connected to the HDMI IN1 jack and the
BD/DVD button on the front panel will be used to listen to
the playback sound (if the player is CEC compliant, input
will be switched automatically). If you add another Blu-ray
Disc player, you can use any other jack than HDMI IN1. It
is possible to change assignment of the input jacks and
HDMI
OUT
HDMI cable
HDMI
OUT
Set-top box/Digital
video recorder, etc.
input selector buttons. For how to make settings, see the
Advanced Manual.
To connect the TV and the unit, connect the
HDMI OUT MAIN jack of the unit and the HDMI IN jack
of the TV with an HDMI cable. With this connection, it
becomes possible to display the setting screen of the unit
on the TV or transmit video/audio signals from the player to
the TV. If your TV supports ARC (Audio Return Channel),
it is possible to play the TV sound with the AV receiver's
speakers with this connection only. If your TV does not
support ARC, you need, in addition to the HDMI OUT MAIN
jack connection, a digital optical cable connection
between the digital audio out optical jack of the TV and
the DIGITAL IN OPTICAL jack of the unit or an RCA cable
connection between the audio output jack of the TV and the
VIDEO/AUDIO IN TV/CD jack of the unit.
HDMI
IN
To use the ARC function, connect to the ARC
compatible HDMI jack of the TV and make an
Source Connection" of "Step 2: Setting Up".
HDMI
OUT
HDMI
OUT
Satellite/Cable
set-top box, etc.
Audio connection with a TV not supporting ARC
Select an appropriate
connection for your TV.
AUDIO
OUT
DIGITAL
OPTICAL
OUT
The unit supports the HDMI Through function that allows
transmission from players to the TV even if the unit is in
standby. You have to modify the settings to enable the
input selection link with CEC compliant device, connection
with ARC compatible TV, and HDMI Through function. See
"2nd Step : Source Connection" of "Step 2: Setting Up".
TV
Blu-ray Disc/
DVD player
TV
3