Cleaning And Maintenance; Disposal; Warranty - Cartrend 50132 Mode D'emploi

BATTERY CHARGER
Protection Description
Abnormality protection To avoid damage to charger and battery, the charger will turn off his own electronic system and will immediately reset
the system to basic settings in the case of
- short circuit
- wrong connection
- open circuit
- reversed polarity connection
- battery voltage below 7.5 V ± 0.5 V
The charger will remain in
Overheating protection The charger is protected by NTC (negative temperature coefficient) control to protect itself from damage.
During the charging process, if the charger becomes too hot or due to high ambient temperature, the power output is
automatically reduced.
The charger continues to trickle charge and automatically starts increasing power when the temperature drops.
MCU controller Fully controlled by internal Micro-Computer-Unit (MCU), which assure a faster, powerful, reliable and smarter charging
process.
Plugged in, the charger
- detects the state of charge of the battery.
- initiates charging process.
Spark protection To eliminate the possibility of sparks, the charger will not begin operation
upon connection to the battery, unless charging mode has been selected. Housing protection Dust and splash proof (IP65)
Double insulated

10) CLEANING AND MAINTENANCE

• The battery charger needs no specific maintenance.
• Always disconnect battery charger from the mains before starting any maintenance or cleaning.
• Clean the battery charger with a dry cloth or soft tissue.
• Do not use any cleaning agents or solvents.

11) DISPOSAL

Old electrical appliances are recyclable. Do not dispose them in the domestic waste! Separately deliver these in a valuable material collection
point.
Dispose the packing material environmentally friendly.
Please give cardboard and paper to the waste paper, foils to a valuable material collection point.

12) WARRANTY

The general warranty conditions relates to production and material defects. If the battery charger is faulty, return it to your dealer.
For ordering spare parts, please contact us:
Spa GmbH & Co. KG
D-76229 Karlsruhe, Germany
www.spa-automotive.com
info@spa-automotive.com
We herewith declare, that the product
Battery charger for lead acid batteries
Model no.: 50132
complies with the appropriate basic safety and health requirements of the EC directives based on its design and type as brought into circulation
by
Spa GmbH & Co. KG, D 76229 Karlsruhe, Germany
Applicable EC directives: 2004/108/EEC (EMC); 2006/95/EEC (LVD)
Applicable harmonised standards: EN 60335-1, EN 60335-2-29, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61 000-3-3, EN 50366
mode and LED is lit to indicate reverse polarity or fault.
29
GB