Yealink W60B Guide De Démarrage Rapide page 4

E
W60B Package Contents
N
G
L
I
S
H
W60B Base Station
Assembling the DECT Phone
1. Connect the base station power and the network using Method a or
Method b.
a. AC Power Option
Note
• If you choose Method a, use Yealink supplied power adapter (5V/600mA).
A third-party power adapter may damage the base station.
• If you choose Method b, you do not need to connect the power adapter.
Make sure the hub/switch is PoE-compliant.
2a. (Desktop Installation) Attach and remove the base stand.
Attach the Base Stand
Align the snap-fits with the corresponding holes
and push forward, snapping them into the holes.
Base Stand Power Adapter Ethernet Cable
b. PoE (Power Over Ethernet) Option
Remove the Base Stand
Remove the snap-fits from the
holes horizontally.
Quick Start Guide
IEEE 802.3af compliant
PoE Hub/Switch
2