Storage; Troubleshooting - SilverCrest SED 3.7 E2 Mode D'emploi

Storage

■ Always protect the epilator head
cap .
■ Store the appliance, the cleaning brush
adapter
■ Store the appliance at a dry and dustfree location.

Troubleshooting

Problem
The appliance
does not function.
The appliance
only runs slowly.
The plucking of
the hairs is very
painful.
Not all hairs are
plucked.
│ GB │ IE │ NI
■ 14
in the storage pouch
Cause
The battery is
drained.
The appliance
is defective.
The battery is
drained.
The hairs may be
too long.
It is possible that the
hairs are too short.
You are working
too fast.
with the supplied protective
and the mains power
.
Solution
Recharge the
appliance.
In this case, contact
Customer Services.
Recharge the
appliance.
Shorten the hairs to
about 0.3 - 0.5 cm.
See also the section
"Tips and Tricks".
The hairs should
have a length of
0.3 - 0.5 cm.
Move the appliance
more slowly over your
skin.
SED 3.7 E2