Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2.
Next the TIMER symbol will flash in the LCD window. You will then be able to set the timer from
0-180 minutes. For safety only 180-minutes is available. If 0 is selected or nothing is selected
within a few a few seconds, the timer function will not be used.
3.
Your cooktop will follow the temperature level and time settings you selected and turn off when
finished. You can change the settings at any time by pressing the CONTROL KNOB and repeat
these steps.
SIMMER
LOW
MED/LOW
TEMPERATURE PROBE MODE FOR PRECISE TEMPERATURE CONTROL
When precise temperature control is needed, use the wireless TEMPERATURE PROBE. This feature
may be used with the TEMP LEVEL or PROGRAM COOKING modes only. Selected temperature will be
closely maintained.
1.
Clip the PROBE to the inside of the pan so that it is submerged in the pan contents or insert it
into the meat you are cooking. It should not touch the bottom of the pan.
2.
Press the ON/OFF button on the PROBE. A red LED on the probe will light up periodically to show
it is active and a temperature probe icon will show in the LCD display during operation.
3.
The current temperature of the food you are cooking (shown on the right side of LCD display)
and the temperature you set it to reach (shown on the left side of LCD display) will alternately
flash in the LCD display.
4.
Clean the probe after use and store.
5.
If the red LED does not come on when the probe is turned on, replace the battery with a standard
A23/12V alkaline battery. The probe will automatically shut down if the induction is turned off or
no change in temperature is detected after 30 minutes. Reset power as noted above.
6.
Time can be set from 1-360 minutes below 200ºF and from 1-180 minutes above 225ºF.
PROGRAM COOKING MODE
This mode allows you to program up to 3 cooking time and temperature zones to create different
stages of cooking. You can program all 3 zones or just one. It may be used in slow cooking, sous vide,
beer brewing and much more; and can be used with or without the temperature probe.
Example: Zone #1 set at 300°F for 60 minutes; Zone #2 set at 225°F for 75 minutes; Zone #3 set at
100°F for 60 minutes.
1.
Touch the PROGRAMMABLE COOKING symbol once to program Zone 1.
2.
Zone 1 Temperature Setting:
•
100ºF will flash in the display
•
Set your desired temperature by turning the CONTROL KNOB
•
Push the KNOB to lock in the temperature. It will then advance to the timer setting.
3.
Zone 1 Timer Setting:
•
The timer icon will flash in the display
•
Set your desired time by turning the CONTROL KNOB
•
Push the KNOB to lock in the time and advance to Zone #2
Note: Time can be set from 1-360 minutes below 200ºF and from 1-180 minutes above 225ºF.
4.
Zone 2 and Zone 3 Settings:
•
Repeat the above instructions for Zone 2 and Zone 3
•
Each zone must be programed quickly, or the previous setting will be locked in
•
If either Zone 2 or Zone 3 are not needed, simply set the temperature and time the same
as Zone 1.
6
100º - 120º
MEDIUM
130º-160º
MED/HIGH
170º-200º
HIGH
225º-275º
300º-375º
400º-450º
Publicité
Table des Matières
