Bluetooth ® Playback; Playing Back - Onkyo TX-L50 Manuel D'instructions

> Before Start > Part Names
®
BLUETOOTH
Pairing
1
2
Onkyo TX-L50 XXX
> Install
Playback

Playing Back

1
2
> Initial Setup > Playback
Onkyo TX-L50 XXX
Advanced Setup | Firmware Update | Others
Pairing
1. When you press the button on the remote controller,
"Now Pairing..." is displayed on this unit's display, and the
pairing mode is enabled.
2. Enable (turn on) the BLUETOOTH function of the
BLUETOOTH enabled device, then select this unit from
amongst the devices displayed. If a password is
requested, enter "0000".
0 To connect another BLUETOOTH enabled device, press
and hold the button until "Now Pairing..." is displayed,
then perform step 2 above. This unit can store the data of
up to eight paired devices.
0 The coverage area is 15 meters (48 feet). Note that
connection is not always guaranteed with all
BLUETOOTH enabled devices.
Playing Back
1. When the unit is on, perform the connection procedure
on the BLUETOOTH enabled device.
2. The input selector on this unit automatically switches to
"BLUETOOTH".
3. Play the music files. Increase the volume of the
BLUETOOTH enabled device to an appropriate level.
0 Due to the characteristics of BLUETOOTH wireless
technology, the sound produced on this unit may slightly
be behind the sound played on the BLUETOOTH
enabled device.
E
N
25