Rechargeable Lithium Ion Battery Safety Information - Rac MBWDISP Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

• If a fault occurs, do not try to repair the unit yourself. Attempts to do so will

void the warranty. Refer all servicing to your supplier.

• Do not open the case of the device. There are no serviceable parts inside.

• Use the touch screen function of the device only with your fingers and only

with slight pressure. Do not use any hard, pointed or sharp devices with the

touch screen. Scratched or mechanically damaged displays are not covered

by the device warranty.

• If the liquid crystal display (LCD) of the MBWDISP is damaged, return the

MBWDISP immediately to your supplier. If you have touched the liquid crystal

fluid with your bare hands, do wash them thoroughly with soap and water. If

you have some of the liquid crystal fluid into your eyes, do rinse them with lots

of water. If you are still suffering from eye troubles or if you are feeling bad

afterwards contact a doctor immediately.

• Install the MBWDISP only at a safe place where there is no risk of damage by

mechanical means (falling down), heating (oven, radiators), freezing (fridge,

deep freeze) or chemicals (strong detergents). The warranty is void for

devices showing any of the above-described damages.

• The first time you connect a MBWDISP to a specific PC, this PC should be

connected to the internet. The automatic USB driver installation for the

MBWDISP is searching the internet for the latest available driver and installs it

accordingly.

CDM21214_Setup.exe manually from the CD which comes with the device.