Rac MBWDISP Mode D'emploi page 10

The touch screen may only be touched with fingers and only with slight pressure.
Sharp or peaked objects or heavy pressure will irreversibly damage the touch screen.
The touch screen is divided in nine touch zones for different functions. The symbols
at the edges and corners of the screen indicate the respective function.
NOTE: It is not necessary to tap precisely on the symbols to activate the
respective function. It is sufficient to tap on the indicated zone on the screen
(see picture above).
The different functions are listed below:
Home function, the display jumps back to the first meter count of the first
configured meter.
Settings function, the settings of the device are passcode protected and only
accessible for installation technicians. However, usually, the MBWDISP is
configured using a PC and its USB interface.
Up / Down function, using the Up / Down function the user selects the radio
meter to display.
Left / Right function, using the Left / Right function the user selects the
different meter counts within one meter. Usually radio consumption meters are
sending radio frames containing several different meter counts / information.
Cancel function, ends the current function without confirmation.
OK function, ends the current function with confirmation.
10 MBWDISP