Perma STAR CONTROL Série Notice Originale page 23

perma STAR CONTROL
en
Translation of the Original Operating Instructions
To prevent the lubrication system from posing any risks, the operator must
ensure that:
- personnel keep the Operating Instructions to hand when carrying out all
relevant work and comply with them;
- the necessary accident prevention and safety regulations are adhered to
during installation or maintenance work;
- the lubrication system is used properly and in accordance with its
DO NOT use in in potentially explosive atmospheres!
Observe safety data sheets of oil/grease.
Avoid contact of oil/grease with eyes, skin and clothing; also avoid
swallowing of oil/grease.
Prevent oil/grease from getting into soil or sewer system.
immediately using appropriate cleaning agents.
You may download lubricant data sheets from our web site or ask your
local supplier.
We accept no liability for any damages and malfunctions which are
caused by inappropriate usage and inappropriate operations on or
with the lubricator.
At the time of delivery, the lubrication system corresponds to the state
of the art and, as a basic principle, is considered safe to operate.
Protect the environment by recycling valuable raw material according to
local regulations.
- 41 - - 42 -
Cable
A
Drive (re-usable)
B
C
Storage conditions
D
Electrical data
E
Airborne noise emission
F
Power supply
G
Display
H
Push button
I
Discharge period
J
Discharge amount
K
Pause time
L
Push down and hold
M
Release button
N
Discharge impulses
O
LED
P
In operation (blinking)
Q
Empty LC
R
Installation-/Exchange date
S
Plug
T
U
Oil retaining valve
V
Oil containing waste
W
This manual helps ensure safe working on and with the automatic
lubrication system, which is designed for use in machinery and equipment
and which lubricates roller and sliding bearings, chains, sliding guideways,
open gears, etc. with oil/grease.
The lubrication system is machine controlled (ON/OFF).
Upon delivery, make sure to check that the delivered goods correspond to
your order. No liability is accepted for subsequent claims of any defects.
If you have any questions or problems, please contact our customer
service team or your local supplier.
perma STAR CONTROL
Properties
I
Components/Initial
II
Handling
III
Displays
1
2
Displays
3
4
Operating modes
5
Installation
IV
Electrical connection
1
Mounting
2
LC exchange
V
Trouble shooting
VI
Error
1
Cause
2
Corrective action
3
Waste disposal
VII
VIII