Installation; Installing The Cabinet Base - Westinghouse QL0232 Manuel De L'utilisateur

Installation

INSTALLING THE CABINET BASE

Carefully check the utility sink for damage and/or missing parts prior
to installation . If there is any damage or if you are missing parts,
do not proceed with the installation . Report damage and/or missing
parts immediately to the manufacturer . Do not dispose of packaging
before you are satisfied with your new utility sink.
- Remove the utility sink (B) and place it on a soft, protective
surface .
- Turn the cabinet (A) upside down onto a protective surface .
- Gently attach the cabinet base (F) onto its proper location . Using
the supplied base screws (H), attach the base to the cabinet .
- Screw the cabinet feet (K) into the four corner locations .
- Gently right the cabinet (A) .
WARNING:
Always wear safety goggles and gloves during
installation .
H
A
6
F
K