Child-Proof Lock; End Of Programme - Beko DV 2570 X Manuel De L'utilisateur

C
Laundry may be added or taken out as much as
desired during a drying process, but this process will
extend the programme duration and increase energy
consumption since the drying will be interrupted
continuously. Therefore, it is recommended to add
laundry before the drying programme has started.

Child-proof lock

There is a child-proof lock to prevent any programme
interruption due to the pressing of button while the
programme is running. The loading door and all buttons
except the "On/Off" button on the control panel are
deactivated when the child-proof lock is active.
Press the "Start/Pause/Cancel" and "Cancel audio
warning" buttons simultaneously for 3 seconds to activate
the child-press lock.
To start a new programme after the programme is over or
to interrupt the programme, the child-proof lock should be
deactivated. Press the same buttons for 3 sec. again to
deactivate the child-proof lock.
C
Child-proof lock is deactivated when the machine is
restarted by pressing the On/Off button.
C
Press the relevant buttons for 3 seconds to activate the
child-proof lock. A long beep will be heard and the
child-proof lock will be activated. A double beep will be
heard if you press any button or turn the programme
selection knob while the child-proof lock is active.
Press the buttons for 3 seconds to deactivate the
child-proof lock. Single beep will be heard and child-
proof lock will be deactivated.
A
A double beep will be heard if you turn the programme
selection knob when the machine is running and the
child-proof lock is active. If you deactivate the child-
proof lock without returning the program selection
knob to its previous position, the programme will
be terminated since the position of the programme
selection knob is changed. The drying light turns
on and the machine remains on hold until a new
programme is selected and the "Start/Pause/Cancel"
button is pressed.
Finishing by canceling the programme
To cancel any selected programme:
Press "Start/Pause/Cancel" button for about 3 seconds.
The "Filter cleaning", "Water tank" and "End/ Anti-
creasing" warning lights will turn on at the end of this
period for reminding purposes.
A
As the inside of the dryer will be excessively hot when
you cancel the programme while the dryer is running,
activate the ventilation programme to cool it down.

End of programme

The "End/Anti-creasing", "Filter cleaning" and "Water tank"
warning lights on the programme follow up indicator will
turn on when the programme comes to an end. The door
can be opened and the machine becomes ready for a
second cycle.
Press "On/Off" button to turn off the dryer.
C
Final step of the drying cycle (cooling step) is performed
without heat application in order to keep the items at a
temperature that would not harm them.
C
A 2-hour anti creasing programme to prevent laundry
from creasing will be activated if you do not take the
laundry out after the programme has come to an end.
C
If you will not take the laundry out immediately, do not
stop the dryer before the drying process is complete.
C
Clean the filter after each drying (please see, Filter
cleaning).
C
Drain the water tank after each drying (please see,
Water tank)
13 EN