Number Buttons; Menu Button - Citizen C27401 Guide D'utilisation

• TV/AV button
Press the TV/AV button, to switch source of video signal from TV program to A/V
input.

• Number buttons

To select channel number 1 to number 9, first press 0 button, then press 1-9
button.
To select channel number 10 to number 99, directly press the two appropriate
number buttons.
To select channel number 100 to number 125, press and hold 1 button until « 1 »
appears on the display then press the number for the last digits.

• Menu Button

Press the MENU button to select, in order, the following menus; PICTURE,
AUDIO, OPTION, CLOCK and PRESET.
• Volume Down Button
Press the VOL – button to reduce the sound volume.
• Channel Down Button
Press the CH – button to tune a lower channel.
• LOCK Switch Button
Press the LOCK Switch, to switch between locked and unlocked TV function (the
red lock will appear on the left of the screen). When locked, only POWER, LOCK
SWITCH and DISP buttons function. When the TV set is in locked mode, you can
also press the DISP button for four seconds to switch unit to unlock mode.
• V-CHIP Menu Button the V-CHIP button to enter V-
CHIP menu, and go on pressing the button to select any
option, or select any option by using the CH+/CH-
buttons.
Press VOL+ or VOL- to change the setting or enter the
next menu where the next option to set is located.
Here is the TV and MPAA rating menu operation – as it
appears on the screen.
There are two categories of ratings you can block (B) or
unblock (U), one based on TV programs ratings and the
other one based on film ratings.
• In order to block a rating, first set the block option to ON
and then enter the TV Rating or the MPAA Rating menu
to program each rating level as desired.
REMOTE CONTROL
14