Preparation - Citizen C27401 Guide D'utilisation

PREPARATION

Once the TV set has been put in place, plug the AC cord into a conveniently located
power outlet and then connect the antenna or CATV cable into the antenna plug on
the back panel of the TV set. Press the main POWER button on the TV set to turn the
unit on. When you have picture and sound, press CH+ or CH- button to tune a
channel and use the VOL+/VOL- buttons to adjust volume to the proper level. If a
blue screen appears, press MENU button on the remote control so the main menu
appears on the screen. Use the CH+/CH- buttons to point the arrow to the "Automatic
Search" option and then press VOL+ or VOL- button to start channel searching by
the tuner. This TV set can memorize channel numbers from 1 to 180. Once the
searching is completed, the TV tuner comes back to channel 2.
TO SWITCH THE TV SET ON AND OFF
Once the AC cord is plugged in, the TV is powered and in standby mode.
Use the power button on the front panel or remote control to turn the TV on and
off.
Please unplug the AC cord when you may not use the unit for an extended period
of time.
OPERATION
9