installation
EN
3.4.2 partially recessed installation
A.
Install 2 metal brackets (1 per side) (supplied) onto the top sides of the appliance (Fig. 3-6).
note:
The appliance comes with 2 screws already installed in the bracket locations. Ensure to remove those
screws, re-use them to fi x the metal brackets to the appliance, and then screw the brackets to the wall.
The appliance comes with 2 metal brackets installed. You can choose to use these brackets during
installation, or discard them and use the 4 new brackets from the hardware kit.
B.
Remove the power cord and complete hardwiring (see "hardwiring installation" section).
C.
Insert the appliance as far into the rough-in frame as possible/desired, and then secure it by installing 2
screws (supplied) through the metal brackets (Fig. 3-7).
D.
Install media (see "crystal ember installation" section). You must complete this step before moving
onto the next step.
E.
Reinstall the front glass.
F x 2
C x 2
C x 2
16
W415-2005 / A / 06.26.19
Fig. 3-6
Fig. 3-7