Heatsail DISC CANTILEVER Manuel page 25

S T E P 2 9
Use the two half rings to hold the
glass up.
S T E P 3 0
The two half rings have to fit
seamlessly. Adjust the position if
needed.
Connect both halves using the
M3 studs and nuts and the metal
bridges.
S T E P 3 1
Look up and identify
protective plate, and
remove by cutting the three zip
ties. Ensure that all decals on the
bottom of the plate and heating
element are removed, if present.
Enjoy your brand new DISC!
Manual
the
then
.
.
EN
25