Electrical Connection; Chimney Assembly - Progress PDG6140E Mode D'emploi Et Installation

44 progress

ELECTRICAL CONNECTION

• Connect the hood to the mains through a two-
pole switch having a contact gap of at least 3
mm.
• Remove the grease fi lters (see paragraph Main-
tenance) being sure that the connector of the
feeding cable is correctly inserted in the socket
placed on the side of the fan.

CHIMNEY ASSEMBLY

Upper exhaust Chimney
• Slightly widen the two sides of the upper fl ue
and hook them behind the brackets 7.2.1, making
sure that they are well seated.
• Secure the sides to the brackets by using the 4
screws 12c (2,9 x 9,5) supplied.
• Make sure that the outlet of the extensions pieces
is aligned with the chimney outlets.
Lower exhaust Chimney
• Slightly widen the two sides of the fl ue and hook
them between the upper fl ue and the wall,
making sure that they are well seated.
• Fix the lower part laterally to the hood body by
using the 2 screws 12c (2,9 x 9,5) supplied.
7.2.1
2.1
2
2.2
EN
12c
12c
12c