Symmons identity S-6704 Manuel D'utilisation Et D'entretien page 4

Installation
Note:
For valve body installation, please
see valve body manual.
1) Install shower mounting plate (N)
to shower valve. Secure with two
screws (M).
N
M
M
2) Install secondary handle (O) to
shower escutcheon (L).
L
O
3) Attach shower escutcheon (L) to
shower mounting plate (N).
L N
Note: Tabs should snap into place.
4) Install dome cover (K) to shower
valve by turning clockwise.
K
5) Install handle (I) to shower valve.
Secure handle with set screw (J).
I
J
Note: Handle should be facing the 6
o'clock position.
6) Install tub spout (P) to pipe fitting
Turn clockwise to tighten.
P
4
7) Place mounting plate (C) in po-
sition, mark and drill 3/16" holes
for tile anchors (Q1), 5/16" holes
for drywall anchors (Q2). Install
anchors.
Q1
Q2
Note: For dry wall 1/2" thick or less,
insert anchor tool (Q3) into drywall
anchor (Q2) to secure behind wall
prior to installing wall cradle.
8) Remove cover of hand shower cra-
dle (E). Install cradle and mounting
plate (C). Secure with three screws
(F). Replace cover on hand shower
cradle.
2
C
Q2
Q3
E
C
F