auna DisGo Box 2100 DVD Manuel D'utilisation page 24

EN
24
3. Adjust the volume by turning the GUITAR VOL on top control panel.
USB/SD Card Playback
You can play music from USB stick or SD Card using the USB/SD slot on the
PA speaker. .Turn on the unit.
1. Insert your USB or SD card into the slot.
2. Once inserted the USB or SD card unit will automatically play.
3. You can 11se tl1e PRE/NEXT/PL AY /PAUSE to control and play music.
NOTES: The speaker system can play the following audio file formats: MP3,
MP4, WMA.The USB/SD Card no more than 32GB. Operation may be slower
when searching large memory files. It will need several seconds to respond
when your USB/SD Card full of contents.
BT playback
You can connect your BT phone or other device to the PA speaker.
1. Turn on the unit.
2. Press the INPUT button which is located on top control panel, next to the
USB/SD slot.
3. The BT is on when you hear two ''tone'' indicator sound.
4. Use your BT phone or other device to search for the PA speaker. It will
displayed as DisGo Box.
5. Connect your device by selecting "DisGo Box".
6. Enter the code and connect with unit.
7. Play m11sic on your phone or device, sound will come from th speaker
through the BT wireless connection.
8. You can use the VOLUME/BASS/TREBLE to adjust the sound level for BT,
also you can adjust the BT music sound through your own phone or other
device.
NOTES: If there is no sound through the PA speaker during BT, check the
volume controller,· both on the unit and on your phone or other device.
Using the Radio
1. Turn on the unit.
2. Press INPUT once, to select FM Radio.
3. Press PRE/NEXT to select your desired radio station. Ensure that you
have the extended the antenna located on the rear of the speaker. It will
ensure the best possible radio quality and signal strength.
4. When you first use the radio, press NEXT button twice, it will auto search
and store the radio statio11s with the strongest signal.