Operation - auna DisGo Box 2100 DVD Manuel D'utilisation

EN
22

OPERATION

Turning ON/OFF
The PA speaker can be powered when connected to main power
or using the internal 12V battery.
1. Connect the power cable to the top of the unit.
2. Connect the other end of power cable to main power.
3. Turn on tl1e switch for the main power.
4. The unit will automatically power on when connected to main power.
Notes: If you wish to use the internal battery power of the unit, just simply
turn on the Battery switch located on the top of unit to ON.
Charging the Battery
Before usiNg the PA speaker for the first time, charge the unit at least 8
hours.
1. Connect the power cable to the top of the panel.
2. Turn off the battery switch on the top of the panel.
3. Recharge indicator light will be on when unit is charging.
Notes: The internal battery will charge while tl1e unit is being operated
and the power switch is on. It is better to charge the unit while the power
switch is off. The batty will be charged automatically as soon as the device
is connected to power. After recharging, the device switches to trickle
charging. However, do not leave the device constantly connected to a
socket. Turning off the device via remote control switches it to standby
mode, which consumes more power than switching it completely off at the
panel of the appliance. Charge the battery before and after each usage for a
lasting battery performance.
Use of the External Battery Option
To use the PA speaker longer than the internal battery life, you can connect
the PA speaker to a external 12V battery source.
1. Find the INPUT DC 12V on the top control pallel.
2. Use the correct cable co1mect the INPUT DC 12V.
NOTES: The PA speaker will consume the inter11al battery first, when it is
low, the LOW BATTERY indicator light located on the control panel will turn
011, you can use the external 12V battery to power on the unit. The external
12V battery will also charge the internal battery while in use.