Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Training and operating instructions
GB
Table of contents
Safety instructions
• Service
• Your safety
Training
• Training by pulse control
• Warning beep when maximum heart
rate reached
Safety Instructions
Note the following points for your own safety:
• The training apparatus must be set up on a suitable, stable
surface.
• Before the first use and also after approx. 6 operating days,
the joints are to be checked for firmness.
• In order to avoid injuries as a result of incorrect loading or
excessive loading, the training apparatus must only be used
in accordance with the instructions.
• It is not recommended that the apparatus be set up in damp
spaces, because this will in time lead to rusting.
• At regular intervals, check that the training apparatus is in
correct working order and that it is in proper condition.
• The safety / technical checks are among the duties of the
operator and must be carried out regularly and properly.
10
GB
• Display in standby mode
10
Interface
10
Training software
10
Firmware update
Training instructions
11
11
11
11
12
12
12
12
14
14
14
14
14
15
15
15
15
15
15
16
16
16
16
16
16
16
16
16
17
• Defective and damaged parts are to be replaced immediate-
ly.
Only use original KETTLER replacement parts.
• The apparatus must not be used until it has been repaired.
• The safety level of the apparatus can only be maintained if it
is regularly checked for damage and wear.
For your safety:
• Before taking up training, have your family doctor advise
you on whether or not you are in suitable health for training
with this apparatus. The medical findings should be the basis
for the structuring of your training programme. Incorrect or
excessive training can lead to damage to health.
Publicité
Chapitres
Table des Matières
