Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
a
Quick start guide
Vacuum cleaner
For more information see the extended manual
online: ned.is/vccs200rd
Intended use
The product is exclusively intended as a vacuum cleaner for indoor use.
The product is not intended for professional use.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image A)
1
Handle
2
Power button
3
Eco button
4
Charging indicator LED
5
Wand release button
6
Extension wand
7
Brush release button
8
Floor brush
9
LED light
Safety instructions
WARNING
-
•
Only use the product as described in this manual.
•
Only use the provided charger and charging base.
•
Check if the voltage is consistent with the product before charging.
•
Only charge the product if the plug is compatible with the power
outlet. Do not use adapters. Do not change the plug.
•
Do not use the product if a part is damaged or defective. Replace
a damaged or defective device immediately.
•
This product can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
product in a safe way and understand the hazards involved.
Children shall not play with the product. Cleaning and user
maintenance shall not be done by children without supervision.
•
Do not immerse the product in water.
•
Do not unplug the charger by pulling on the cable. Always grasp
the plug and pull.
•
Do not plug or unplug the charger with wet hands.
•
Do not use the product while it is being charged.
•
Do not put any objects into openings. Do not use with any
opening blocked. Keep free of dust, lint hair etc.
•
Keep hair, loose clothing, fingers and all body parts away from
openings and moving parts.
•
Do not vacuum hard or sharp objects such as glass nails, screws,
coins etc.
•
Do not vacuum hot coals, cigarettes, matches or any hot smoking
or burning objects.
•
Do not use without filters in place.
•
Use extra care when vacuuming on stairs.
•
Do not vacuum flammable or combustible materials (lighter fluid,
gasoline, etc.) or use in the presence of explosive liquids or vapor.
•
Do not vacuum toxic material (chlorine bleach, ammonia, drain
cleaner, etc.)
•
Do not use in an enclosed space filled with vapors given off by
oil-based paints, paint thinner, moth proofing, flammable dust, or
other explosive or toxic vapors.
•
Only use on dry, indoor surfaces.
•
Store your appliance indoor in a cool, dry area.
•
Keep the end of the hose, wands and other openings away from
your face and body.
VCCS200RD_MAN_COMP_0919_(19474 1422)_v01_00.indd 4
VCCS200RD
10
Battery pack
11
Battery pack release button
12
Dust collector release button
13
Dust collector
14
Dust discharge button
15
Charging base
16
Mains adapter cord
17
Accessory nozzle
18
Brush
•
Do not use the cleaner to clean your pets or any animal.
•
Keep the head (eyes, ear, mouth, etc.) away from the openings,
when the cleaner is working.
•
If you hear a squeaking sound and suction power is reduced,
clear of blockages and clean the air filter.
•
Do not open the battery pack or the motor area. There are no
user serviceable parts inside.
Assembling the product (image B)
q
1
1. Insert A
into A
.
6
1
2. Insert A
into A
.
8
i
6
3. Insert A
or A
into A
Charge the product (image C)
y
1. Attach A
to the wall using 2 screws and wall plugs.
u
y
2. Insert A
into A
.
u
3. Connect A
to a power outlet.
y
4. Place the cleaner in A
.
4
4
A
starts blinking to indicate the product is charging.
4
The three bars indicate the current battery level.
4
When charging is complete, A
-
Only charge the product indoor, with ambient temperature
between 4°C and 35°C.
Unplug the charging base when charging is complete. Do not
-
overcharge the battery.
Always remove the product from the charging base before
-
assembling or removing accessories.
Always remove the product from the charging base before using it.
-
-
The motor automatically switches off when the product
overheats. When the product overheats:
2
1. Press A
to switch off the product.
q
2. Remove A
.
3. Allow the product to cool down for approximately 0.5 hour
before using again.
Using the product
1. Remove the product from A
2
2. Press A
to switch on the product.
2
3. Press A
again to switch off the product when you are finished.
y
4. Place the product on A
.
Emptying the dust collector
t
1. Press A
while holding A
It is not necessary to disassemble the product to empty A
-
Cleaning the dust collector (image D)
e
r
Press A
to release A
.
-
r
12
Disassemble A
and D
-
rt
12
-
Rinse A
and D
-
Let all parts dry completely before reassembling the product.
-
The filters should be cleaned every 6 months or as soon as
suction power is weakened.
-
The filters should be checked regularly for signs of damage,
preferably after each cleaning task.
-
The filters must be replaced immediately if they are damaged.
Always disconnect the vacuum cleaner from the power outlet
-
before checking the filters.
Specifications
Product
Article number
Dimensions (l x w x h)
Battery voltage
Maximum power
Suction power
4
.
4
turns off.
y
.
r
above a dust bin.
r
.
.
in water.
Stick vacuum cleaner
VCCS200RD
980 x 240 x 200 mm
18.5 V
100 W
7000 Pa
16-9-2019 15:40:49
Publicité
Table des Matières
