Troubleshooting Guide - Paradigm Monitor SE Série Manuel D'utilisateur

TROUBLESHOOTING GUIDE

No Sound
No Sound
from One
or More
Speakers
Lack of
Bass or
Dislocated
Image
17
w w w . p a r a d i g m . c o m
Monitor-SE Series Owners Manual_090617.indd 17
Make sure receiver, preamp or amplifier
is plugged in and turned on. Check power
outlet at the wall is working. Are headphones
plugged in, or is system on Mute? Re-check
all connections.
Check your balance. Check that all power
cords are properly plugged in and functioning.
Swap a non-working speaker with one that
works to determine if the problem is with the
speaker or something else (i.e. wiring, amplifier).
One or more speakers may be connected out
of phase (their polarity is reversed). Re-check to
ensure that each speaker's cable is connected
with correct polarity: red (+) to red (+) and black
(-) to black (-).
2017-09-07 10:40 AM