Speaker Connection; Troubleshooting Guide - Paradigm CI Pro Serie Mode D'emploi

SPEAKER CONNECTION

All Models (2 Speaker Stereo Setup)
+
P80-SM (2 Speaker Stereo Setup)
Fig. 5b
Move switch to MONO Position
Move switch to MONO Position

TROUBLESHOOTING GUIDE

PROBLEM
No Sound
No Sound from One
or More Speakers
Lack of Bass or
Dislocated Image
(Stereo)
11
L
R
RECEIVER /
AMPLIFIER
+
L
R
RECEIVER /
L R
AMPLIFIER RECEIVER /
AMPLIFIER
Make sure receiver, preamp or amplifier is plugged in and turned on.
Check power outlet at the wall is working. Are headphones plugged
in, or is system on Mute? Re-check all connections.
Check your balance control. Check that all power cords are properly
plugged in and functioning. Swap the Left speaker cable with the
Right speaker cable at the receiver/amplifier end to determine if the
problem is with the speaker or something else (i.e. wiring, amplifier).
One or more speakers may be connected out of phase (their polarity is
reversed). Re-check to ensure that each speaker's cable is connected
with correct polarity: red (+) to red (+) and black (-) to black (-).
Fig. 5a
Wiring for all models
(except P80-SM).
P80-SM (1 Speaker Stereo Setup)
L
RECEIVER /
L
RECEIVER /
AMPLIFIER
AMPLIFIER
Fig. 5c
Move switch to STEREO Position
Move switch to STEREO Position
SOLUTION
R
R