Quick Start; Setting The Time And Day; Changing The Temperature - Olimpia splendid B0813 Manuel De L'utilisateur

Quick Start

Setting the time and day

You must set the time and day before you can use any of the
NUI's programming features.
1. Open the door
2. Press D/H/M SET CLOCK (
3. Press the up or down button, to change the hour.
Stop on the correct hour.
4. Press the D/H/M SET CLOCK (
again and the minutes will flash on the display.
5. Press the up or down button to change the minutes.
Stop on the correct number.
6. Press the D/H/M SET CLOCK (
again and day will flash on the display.
7. Press the up or down button to change the day.
Stop on the correct number.
8. Press OK button or close the door.

Changing the temperature

There are times when you want to change temporary
temperature. Here's how.
1. Open the door
2. Press mode (M) button to select the desired mode.
Press up or down buttons on the right side until you
reach the desired temperature setting. This creates a
"temporary hold" until the next pre-set time period.
You will see schedule active icon
( ) flashing on the display.
3. To maintain that temperature setting so it doesn't
change during the next pre-set time period, press
hold ( ) symbol button on the left side. The
temperature will stay at the setting you selected until
you release the hold. The schedule active icon (
will disappear.
4. To return the temperature to the pre-set level for that
time period, press hold (
the hold and the temperature will return to its
programmed level. The schedule active icon (
appear.
5. Close the door.
) button.
) symbol button
) symbol button
)
) symbol. This releases
) will
5