Changing Your Feature Settings - Olimpia splendid B0813 Manuel De L'utilisateur

Advanced Programming Options

Changing your Feature settings

Now you can change the settings of different features
with the . Here is how you can program you thermostat
settings.
1. Open the door.
2. Press home ( ) and away (
hold for 3 seconds. You will see parameter number "1"
is flashing in the time display area.
3. Press mode (M) button, you will see parameter value
will be flashing in the temperature display area of the
display.
4. Press up or down buttons to change the settings to
your desired value, which should be within the range
specified for that parameter and specified icon will be
displayed for that particular parameter.
5. Press the mode (M) button or OK button to freeze
your settings.
If you press OK button, it will save your
settings and parameter value will be flashing,
you can change the value further.
If you press mode (M) button, it will save the
settings and it will enable the next parameter
to be changed. The parameter number will be
flashing.
6. Press up and down button to go to the next
parameter. (If the current display is at parameter
number).
7. You can program all your parameters by following
the same procedure. Once you completed, press OK
or zone ( ) button to save your settings and will
return to the normal display screen (If the current
display is at parameter number).
8. Close the door.
Note: Refer features table for more details of parameters.
14
) buttons and