Publicité
Les langues disponibles
Les langues disponibles
Programming the Control
the display, represents Frequency Reduction
Mode is "OFF" now,
If the previous Frequency Reduction Mode
status is OFF, the Frequency Reduction Mode
icon (
) symbol will appear on the screen
which represents Frequency Reduction Mode
is ON now.
12.
Press the period (
) button twice. P2 will flash on
the display.
13.
To change the hours, press the start time (
button.
14.
Press home (
), away (
15.
Press zone (
) button to set the CDU mode either
ON or OFF.
16.
Press hold (
) button to set the Frequency reduction
mode either ON or OFF.
17.
Similarly you can program P3, P4, P5 and P6.
18.
If you did not select 1 to 7 when you started this
process, then repeat all the steps for your remaining
timeframe choice – 1 to 5, 6 to 7 or individual day :
1, 2, 3, 4, 5, 6, 7
19.
To confirm that the thermostat has accepted your
changes, cycle through the six time periods by
pressing days (
), selecting your time frame – 1 to
7(all days), 1 to 5(weekdays), or 6 to 7(weekends) or
individual day : 1, 2, 3, 4, 5, 6, 7 – and then pressing
the period (
) button to see the Touch 'N' Go option
assigned for each start time, CDU Mode Setting and
Frequency Reduction Mode setting. Each time you
press period (
), you will advance to the next start
time.
20.
Press OK button or close the door.
Advanced Programming Options
Using Touch 'N' Go buttons
Once you have set the temperatures and time periods that
correspond with your three Touch 'N' Go comfort buttons
(see Programming the Touch 'N' Go feature), and Assigning
time periods to temperatures, you won't need to use your
Touch 'N' Go buttons unless you want to make a temporary
change. For example, if you go to bed earlier than usual,
pressing the sleep button will lower the temperature sooner
)
) or sleep (
).
than scheduled. If you go to bed later than usual, pressing
the home button will keep the home warmer past your
usual bedtime but you'll need to press sleep before you go
to bed.
11
Publicité
Chapitres
