Disclaimer Of Liability; Safety Guidelines - Siemens sitrans LR 400 Guide Rapide

SITRANS LR 400 Quick Start Manual
This manual outlines the essential features and functions of the SITRANS LR 400 Solids and
Liquids versions. We strongly advise you to acquire the detailed version of the manuals so you
can use your device to its fullest potential. The complete manuals are available on our web
site: https://pia.khe.siemens.com/index.asp?Nr=4936.
The printed manual is available from your local Siemens Milltronics representative.
Questions about the contents of this manual can be directed to:
Siemens Milltronics Process Instruments Inc.
1954 Technology Drive, P .O. Box 4225
Peterborough, Ontario, Canada, K9J 7B1
E-mail: techpubs.smpi@siemens.com
Copyright Siemens Milltronics
Process Instruments Inc. 2005. All
Rights Reserved
We encourage users to purchase authorized
bound manuals, or to view electronic
versions as designed and authored by
Siemens Milltronics Process Instruments Inc.
Siemens Milltronics Process Instruments Inc.
will not be responsible for the contents of
partial or whole reproductions of either
bound or electronic versions.

Safety Guidelines

Warning notices must be observed to ensure personal safety as well as that of others, and to
protect the product and the connected equipment. These warning notices are accompanied by
a clarification of the level of caution to be observed.
WARNING: This product can only function properly and safely if it is
correctly transported, stored, installed, set up, operated, and
maintained.
Note:
Process temperature and pressure capabilities are dependent upon
information on the process device tag (liquids version only). The reference drawing
listed can be downloaded from the Siemens Milltronics web site at
www.siemens.com/processautomation.
WARNING:
97/23/EC and is not intended for use as a safety device.
7ML19985QN83
While we have verified the contents of this manual for
agreement with the instrumentation described,
variations remain possible. Thus we cannot guarantee
full agreement. The contents of this manual are regularly
reviewed and corrections are included in subsequent
editions. We welcome all suggestions for improvement.
Technical data subject to change.
This product is designated as a Pressure Accessory per Directive
SITRANS LR 400 – QUICK START MANUAL

Disclaimer of Liability

Page EN-1