Kampa Travel Pod Action AIR Guide De L'utilisateur page 8

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
Care
Zips should be treated with care, use two hands to close and open and never
tread on them. Never force a zip. We strongly recommend that you carry a
comprehensive spares kit including silicone waterproof spray, seam sealer and
tape for repairing the AirPoles.
Repairs to the awning should be made by a company recommended by Kampa
or your supplying retailer. Repairs and alterations made by an unauthorised
company may invalidate your warranty.
In the Event of a Puncture
1.
Undo the inflation/deflation valve from the pole and re-attach ensuring that
the valve is firmly connected.
2. Re-inflate the AirPole.
3. If tightening the hose fittings does not solve the problem then the AirPole
may be punctured.
To Remove an AirPole
1.
Unzip the outer sleeve holding the AirPole.
2. Remove the AirPole.
3. Unzip the protection sleeve of the AirPole, whilst deflated, to expose the
inflatable bladder.
4. Locate the puncture. This is made easier if you inflate the bladder. For small
holes it may be necessary to submerge the bladder in water.
5. Once located, the bladder can be repaired using repair tape. We
recommend Kampa Awning Repair Tape - available from your retailer.
The repair can be enhanced by using a combination of the tape with Kampa
Repair Solution.
Follow the manufacturers instructions to repair.
Another alternative is to replace the tube. Spares are available from your
retailer or direct from Kampa.
Once a repair or replacement has been made, the AirPole can simply be
zipped back into the outer sleeve.
TP-AIR-UM-09-17-Rev.B
8

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Travel pod motion airTravel pod cross airTravel pod trip air

Table des Matières