Kampa Travel Pod Action AIR Guide De L'utilisateur page 4

Setting Up
TP-AIR-UM-09-17-Rev.B
Unroll and lay the tent out in the
1
required position (1). Peg each corner
of the awning.
Ensure tension is applied between
the pegs and that the awning keeps
it's rectangular shape. You may need
to re-peg later.
Unzip the doors to allow air into the
awning.
2
Starting from the front of the awning,
unscrew the top cap of the inflation
valve and attach the pump nozzle (2).
Pump up each AirPole (3).
The pump has a pressure gauge and
each AirPole should be inflated to
between 7-8 psi (0.48-0.55 bar). As
each AirPole is inflated the awning will
3
lift.
It may be necessary to go inside
the awning and push the AirPoles
upwards so that they can assume
their correct shape (4).
4
WARNING!
Never open the zip on an
AirPole inner sleeve whilst
inflated as this will result in
the bladder bursting.
4