Mode Pilotage - HORI RQZ-PS4142U Manuel D'instructions

* After 4 seconds of inactivity between steps, Program LED (Right) will turn off and program mode will stop.
* During steps 2, button input from the controller to the PlayStation
* When the Program LED (Left) turns on, it indicates that a button is remapped and will not turn off
until button function is reset to default.
* If you want to disable button function, press and hold for 3 seconds the same button you pressed in step 2
at the time of step 3.
* If you pressed multiple buttons during step 3, the last button you pressed will be assigned.
* Controller settings are stored even if the USB is disconnected.
How to reset indivisual buttons
Use the Step 3 above to individually reset buttons to default.
How to reset all buttons / functions to default
①
3
sec
②

■ Mode Pilotage

Experience quicker handling by switching the max steering output from 270 degrees to 180 degrees.
180°
270°
4 will be disabled.
Ⓡ
Program LED (Right)
will flash (slowly).
Program LED (Right) will turn off and all button
assignments will reset to its default settings.
Program LED (Left) will light
blue for 3 seconds.
Program LED (Left) will light
green for 3 seconds.
7