HORI RQZ-PS4142U Manuel D'instructions page 3

Turn the steering wheel to its maximum rotation position once in both directions.
Press down fully into each of the L pedal and R pedal once.
* Please repeat the process when you re-connect the controller or restart the PlayStation
system.
Wired connection cannot be used on PlayStation
This product cannot be paired by connecting a USB cable.
Connect the controller to the PlayStation
Must be paired to each PlayStation 4 separately.
Ⓡ
Do not turn the steering wheel while pairing or re-connecting.
PC
To use this product on Windows PC, refer to the URL below for driver installation instructions.
【URL】 https://hori.jp/info/install/
※Above step is for WindowsⓇ8~8.1/7 only; not necessary for WindowsⓇ10.
Wired Connection
Toggle the Platform Toggle Switch to "PC" and connect the USB cable to the PC.
Wireless Connection
For Bluetooth compatible PCs only.
*For non-Bluetooth compatible PC, please purchase a separate Bluetooth adapter.
<Windows 10>
1. Click the Windows Start Button located on the bottom left of the screen.
2. Click " Settings" from the Start Menu.
3. Click "Devices" from the Windows Settings screen.
4. Turn "Bluetooth" On and click "Add Bluetooth or other device".
5. Click "Bluetooth" from the Add a device screen
6. While holding down the "SHARE" button of this product, press and hold the "PS" Button (More
than 5 seconds).
* The LED Indicator on this product will flash and begin pairing.
7. Select "HORI Wireless Racing Wheel" from the list to complete the pairing.
<Windows 8.1/8>
1. Move the mouse cursor to the bottom right of the screen to display the sidebar.
2. Click "Settings" then select "Change PC Settings".
3. From the PC Settings screen:
<Windows 8.1>
Click "PC and Device", then select "Bluetooth".
From the "Bluetooth Device management" screen, turn "Bluetooth" On.
<Windows 8.0>
Click "Wireless", then turn "Bluetooth" On.
Click "Device", then select "Add a Device".
4. While holding down the "SHARE" button, press and hold the "PS" Button (More than 5
seconds).
* The LED Indicator will flash and begin pairing.
5. Select "HORI Wireless Racing Wheel" from the list to complete the pairing.
<Windows7>
1. Right click the Bluetooth icon inside the Windows Taskbar located on the lower right of the
screen and click "Add a Device".
* If you do not see the Bluetooth icon
① Click the Windows Start Button located on bottom left of the screen.
② Click "Device and Printer" and right click "PC" from the list and click "Bluetooth Settings".
* Click "Options" tab and checkmark "Allow Bluetooth devices to connect to this
computer".
2. While holding down the "SHARE" button, press and hold the "PS" Button (More than 5
seconds). * The LED Indicator will flash and begin pairing.
3. Select "HORI Wireless Racing Wheel" from the list to complete the pairing.
4.
Ⓡ
4 via USB connection to charge if the battery level is low.
Ⓡ
4 or PC
Ⓡ
3