Adjustable Dead Zone; Quick Handling Mode ・ Dead Zone Adjustment・ Sensitivity Adjustment Reset All - HORI RQZ-PS4142U Manuel D'instructions

■ Adjustable Dead Zone

The dead zone play of centered wheel is adjustable to seven levels.
Program LED (Left) color will change to indicate the dead zone value.
①
3
sec
②
③
④
⑤
⑥
* If you do not perform step ② after ①, the Program LED (Right) will turn off after four seconds and button assignment mode will
automatically end.
* During steps 2〜6, only the steering unit and foot pedal input are enabled.
Button input from the controller to the PlayStation
* Controller settings are stored even if the USB is disconnected.
Wide
1 2
LED color Green Yellow
■ Quick Handling Mode ・ Dead Zone Adjustment ・ Sensitivity Adjustment Reset All
To simultaneously reset all of the following: Quick Handling Mode ・ Dead Zone Adjustment ・ Sensitivity Adjustment.
①
3
sec
②
③
When Quick Handling Mode is canceled, steering wheel input value will default to 270°.
Dead zone and sensitivity default values are set to "4".
* If you do not perform step ② after ①, the Program LED (Right) will turn off after four seconds and
button assignment mode will automatically end.
10
Program LED (Right)
will flash (slowly).
Program LED (Right)
will flash (quickly).
Left Program LED color will
change according to setting
and chart below.
Dead zone value increases by pressing up on the Directional Pad.
Narrow
Dead zone value decreases by pressing down on the Directional Pad.
Wide
Program LED (Right)
will turn off.
(The Program LED (Right) will light green when assigning buttons.)
4 will be disabled.
Ⓡ
Default
3 4 5
Red Purple Blue
Program LED (Right)
will flash (slowly).
Program LED (Right)
will turn off.
(The Program LED (Right) will light green when assigning buttons.)
Narrow
6 7
Light Blue White