Modo Conducción Rápida - HORI RQZ-PS4142U Manuel D'instructions

* After 4 seconds of inactivity between steps, Program LED (Right) will turn off and program mode will stop.
* During steps 2, button input from the controller to the PlayStation
* When the Program LED (Left) turns on, it indicates that a button is remapped and will not turn off
until button function is reset to default.
* If you want to disable button function, press and hold for 3 seconds the same button you pressed in step 2
at the time of step 3.
* If you pressed multiple buttons during step 3, the last button you pressed will be assigned.
* Controller settings are stored even if the USB is disconnected.
How to reset indivisual buttons
Use the Step 3 above to individually reset buttons to default.
How to reset all buttons / functions to default
①
3
sec
②
■ Modo Conducción rápida
Disfruta de una experiencia de conducción más rápida ajustando el ángulo de giro máximo de 270º a 180º.
180°
270°
4 will be disabled.
Ⓡ
Program LED (Right)
will flash (slowly).
Program LED (Right) will turn off and all button
assignments will reset to its default settings.
El LED de configuración (izquierdo)
se pondrá azul durante 3 segundos.
El LED de configuración (izquierdo)
se pondrá verde durante 3 segundos
7