Comelit WICAM020A Guide D'installation Rapide page 13

4. Set up your camera
1. Press the reset button on top of camera for about three seconds and then release the button, a blue LED in
front of camera will blink slowly when reset process starts.
2. Use APP scan the QR code, enter your Wi-Fi password, the camera will automatically connect to your Wi-Fi
network.
3. The blue light is on, camera is ready for viewing.
5. Charge your Camera battery
Note: The camera battery is not fully charged when it leaves the factory for safe delivery.
If you need to recharge the battery, use the supplied power adapter by connecting the power connector to the camera
according to the picture below.
Note: The original adapter and cable must be used to charge the battery.
Note: The complete charging time of the battery is more than 5 hours.
6. You're done!
Congratulations! Your camera is set up and ready to go.
Align the USB icon to
insert the USB port
FR
IT
EN
ES
NL
13