Listening To Radio - Samsung HT-E4200 Mode D'emploi

Media Play
Encoding - which changes by language
or by geographical area - modifies
how the product sorts, arranges, and
Encoding presents files or tracks, displays dates,
etc. Select Encoding to change the
encoding to match your language or
geographical area.
Displays media file and content
Information
information.
| NOTE |
\ Depending on the disc or storage device, the Tools menu
may differ. All options may not be displayed.

Listening to Radio

Using Buttons on the Remote Control
1 · Press the FUNCTION button to select FM.
2 · Tune in to the desired station.
• Preset Tuning 1 : Press the 5 button
to select PRESET and then press the
TUNING/CH (,.) button to select the
preset station.
- Before you can tune to preset stations,
you must add preset stations to the
product's memory.
• Manual Tuning : Press the 5 button
to select MANUAL and then press the
TUNING/CH (,.) button to tune in to a
lower or higher frequency.
• Automatic Tuning : Press the 5 button
to select MANUAL and then press and
hold the TUNING/CH (,.) button to
automatically search the band.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the sound
switches between STEREO and MONO.
• In a poor reception area, select MONO for a
clear, interference-free broadcast.
46
|
English
HT-E4200_XU_0223.indd 46 HT-E4200_XU_0223.indd 46
Presetting Stations
Example : Presetting FM 89.10 into memory.
1 · Press the FUNCTION button to select FM.
2 · Press the TUNING/CH (,.) button to
select <89.10>.
3 · Press the TUNER MEMORY button.
• NUMBER flashes on the display.
4 · Press the TUNER MEMORY button again.
• Press the TUNER MEMORY button before
NUMBER disappears from the display on its
own.
• After you press the TUNER MEMORY
button, NUMBER disappears from the
display and the station is stored in memory.
5 · To preset another station, repeat steps 2 to 4.
• To tune in to a preset station, press the
TUNING/CH (,.) button.
About RDS Broadcasting
Using the RDS (Radio Data System) to
receive FM stations
RDS allows FM stations to send an additional
signal along with their regular program signals.
For example, the stations send their station
names, as well as information about what type of
program they broadcast, such as sports or music,
etc.
When tuned to an FM station which provides the
RDS service, the RDS indicator lights up on the
display.
Description on RDS function
• PTY (Program Type) : Displays the type of
program currently being broadcast.
• PS NAME (Program Service Name) : Indicates
the name of broadcasting station and is
composed of 8 characters.
• RT (Radio Text) : Decodes the text broadcast by
a station (if any) and is composed of maximum
64 characters.
2012-02-24 오전 2:16:17 2012-02-24 오전 2:16:17