Connecting To External Devices; Method 1 Aux In : Connecting An External Analogue Component; Method 2 Optical : Connecting An External Digital Audio Component - Samsung HT-E4200 Mode D'emploi

Connecting to External Devices

To select the correct mode for an external device, press the FUNCTION button. Each time you press the button,
the mode changes in this order : BD/DVD
SPEAKERS OUT
LAN
FRONT L
SUBWOOFER FRONT 5V 350mA
R
WIRELESS LAN
Red
R
White
W

Method 1 AUX IN : Connecting an External Analogue Component

Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out
jack on the external analogue component.  Select the AUX mode.
• Be sure to match the colours on the cable plugs to the colours on the input and output jacks.

Method 2 OPTICAL : Connecting an External Digital Audio Component

To connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes).
Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the
Digital Optical Out jack of the external digital device using a digital optical cable.
 Select the D. IN mode.
| NOTE |
\ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
\ This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
\ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
HT-E4200_XU_0223.indd 21 HT-E4200_XU_0223.indd 21
D. IN AUX
AUX VIDEO
IN OUT
L
FM ANT
R OPTICAL
HDMI OUT DIGITAL
AUDIO IN
(Cable not supplied.)
Method 1
External Devices
R. IPOD FM
AUX VIDEO
IN OUT
L
OPTICAL
R
DIGITAL
HDMI OUT
AUDIO IN
AUDIO OUT OPTICAL OUT
FM ANT
(Cable not supplied.)
Method 2
21
|
English
2012-02-24 오전 2:14:27 2012-02-24 오전 2:14:27