Emptying The Dirt Collecting Tank; Stopping Operation; Empty The Dirt Collecting Tank; Storage - Clarke Technology Alto FLOORTEC 380 M Mode D'emploi

FLOORTEC 380 M
english 2.4 Supervision of
Operation
2.4.1 Emptying the dirt
collecting tank
2.5

Stopping Operation

2.5.1 Empty the dirt
collecting tank
2.5.2 Raise the side brushes

2.5.3 Storage

6
CAUTION!
String, wire, packag-
ing tape and similar
long objects
be picked up from the floor by
hand and not swept up with the
sweeping machine:
see 2.4
The handle can be folded over
to reduce the storage space
required for the sweeping ma-
chine.
This will help to maintain the
brushing capacity of the ma-
chine and
should damage caused by jamming of
the drive.
Empty the dirt collecting tank at
regular intervals. The machine
will no longer sweep when the
tank is full.
• Lift out the dirt collecting tank
from above and tip the con-
tents over the side edge into
a dustbin.
Raise the side brushes from the
ground to prevent any unneces-
sary brush wear.
• Slightly loosen the retaining
knobs and pull the handle
forward against the normal
pushing direction.
• Fold the handle forward. The
sweeping machine can then
be stored in an upright posi-
tion.
prevent machine