HQ AVSWITCH- 80 Mode D'emploi page 5

• Use the "RES." key to adjust the resolution.
• Use IR Remote control for more control features.
Manual Operation mode
• Power On:
Please use the power key to turn on the AVSWITCH-80 from standby
mode. The LED indication light will be on.
• Power Off:
Please use the power key to turn the AVSWITCH-80 into standby
mode. The LED indication light will be off.
• Selection:
Press the selection key of each input source to select the inputs.
After you press the selection key, the selection key will be light up, to
indicate the input source device.
- Press AV1 key to select analog video input between Composite
Video 1, S-video 1, and Component video 1.
- Press AV2 key to select analog video input between Composite
Video 2, S-video 2, and Component video 2.
- Press VGA1 key to select VGA 1 video input.
- Press VGA2 key to select VGA 2 video input.
- Press HDMI1 key to select HDMI 1 input.
- Press HDMI2 key to select HDMI 2 input.
• Resolution setting: 480P, 720P, 1080i, 1080P.
Use "RES." key at front panel to set the scaling resolution. The
sequence is in a circling order.
5